Freeplaytech Forum
Black transparent case with PS Vita stick and mixed trigger/shoulder - Printable Version

+- Freeplaytech Forum (https://forum.freeplaytech.com)
+-- Forum: Freeplay Zero / Freeplay CM3 / Game Pie Advance (https://forum.freeplaytech.com/forumdisplay.php?fid=24)
+--- Forum: Show Off Your Build (https://forum.freeplaytech.com/forumdisplay.php?fid=27)
+--- Thread: Black transparent case with PS Vita stick and mixed trigger/shoulder (/showthread.php?tid=4776)

Black transparent case with PS Vita stick and mixed trigger/shoulder - Porcinus - 03-16-2019

First off all, thanks to Hipcat for sharing his amazing builds, I took many ideas from his work Smile

Case modifications has been done the same way as my other builds.

Start, select and hotkey buttons are placed under the screen:
               
Note: The PCB in this picture is not the good one, The new one share ground for all switches.

Triggers and shoulders share the same location:
           

Custom addon board with a USB Nanohub, WiFi module, 3 ADC chips (2 for the the joystick and one for the battery monitoring), RTC chip and a fan:
   
More information about this board : https://forum.freeplaytech.com/showthread.php?tid=4777

On analog side, a PS Vita 1000:
       

RE: Black transparent case with PS Vita stick and mixed trigger/shoulder - Hipcat - 03-19-2019

(03-16-2019, 08:55 AM)Porcinus Wrote: First off all, thanks to Hipcat for sharing his amazing builds, I took many ideas from his work Smile

Case modifications has been done the same way as my other builds.

Start, select and hotkey buttons are placed under the screen:
 
Note: The PCB in this picture is not the good one, The new one share ground for all switches.

Triggers and shoulders share the same location:
 

Custom addon board with a USB Nanohub, WiFi module, 3 ADC chips (2 for the the joystick and one for the battery monitoring), RTC chip and a fan:

More information about this board : https://forum.freeplaytech.com/showthread.php?tid=4777

On analog side, a PS Vita 1000:

This is really cool! I wanted to add a USB hub to my last build, but didn’t get it done. Mine would have been a mess compared to how clean yours is with the custom board and everything. You are on another level.

RE: Black transparent case with PS Vita stick and mixed trigger/shoulder - Porcinus - 03-20-2019

Thanks Wink
Not another level, I just have anything I need to ease the work Smile

I not sure if it can be possible to fit additional hardware in your slim build, could be interesting to try out Smile