+- Freeplaytech Forum (https://forum.freeplaytech.com)
+-- Forum: Freeplay Zero / Freeplay CM3 / Game Pie Advance (https://forum.freeplaytech.com/forumdisplay.php?fid=24)
+--- Forum: Freeplay Zero/CM3 (AKA GPA) Software (https://forum.freeplaytech.com/forumdisplay.php?fid=26)
+--- Thread: Hotkey not working in Retropie 4.6 test image (/showthread.php?tid=5196)
Hotkey not working in Retropie 4.6 test image - hrrsnmb - 01-24-2021
I previously had the power-slider 'hotkey mode' working nicely in the 4.5 image (Freeplay_CM3_20051201.img.gz). In that 4.5 build however, I had not been able to get the scraper(s) to work so I decided to try the 4.6 test image. (Freeplay_CM3_Test-RetroPie-46-20051302.img.gz)
To my relief, the scraper works fine in the 4.6 test image, but the hotkey-mode system appears to be non-existent when trying to exit a game. Upon trying to reconfigure the inputs, sliding the power button twice maps the hotkey to 'button 12', but the hotkey-mode has no effect in-game as it did before. I've tried multiple lr emulators, and every possible hotkey combination listed in the Read Me.
On a whim I updated the xpad driver, but this appears to break things further. (The system now thinks the right shoulder button is the start button.)
Has anyone gotten both the scraper & hotkey working in the same build?
--
Boxy Pixel Pre-Configured Freeplay CM3
Raspberry Pi CM3+ Lite rev1
Freeplay 2000mAh Battery
Lexar A1 64GB microSD
Tenda W311MI USB WiFi adapter