01-26-2018, 10:08 AM
I cannot seem to get the power switch to work as the black switch on the cm3 board sits too low and the switch jist moves over it. Any ideas on a fix? Thanks.
Power switch doesn't catch on the board
|
01-26-2018, 10:08 AM
I cannot seem to get the power switch to work as the black switch on the cm3 board sits too low and the switch jist moves over it. Any ideas on a fix? Thanks.
01-26-2018, 10:25 AM
The first thing to do is make sure that your shell is closing fully. Maybe there is something keeping it from coming together all the way.
Card Fighters' Clash 2 English Translation ( http://cfc2english.blogspot.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ ) Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )
01-27-2018, 06:03 AM
(This post was last modified: 01-27-2018, 06:04 AM by deliveryninja.)
I have tried to remove some foam from behind the screen to see if it was holding the board too high but I am not sure it is possible to get it to catch without putting pressure on top of the power connectors. I screwed the circuit board in and took some pictures to show how it cannot currently go any lower than it is.
https://imgur.com/a/lxuLa I think I'll find a way to rectify it, I was thinking a small wire to bind them together rather than glue or somehow extending the prong up. Alternatively I could put pressure on the power connector from the back of the case.
01-27-2018, 06:22 AM
In the bottom right of that photo, there’s a screw in the circuit board. That shouldn’t be there. I bet it’s holding the shell from coming together fully.
Card Fighters' Clash 2 English Translation ( http://cfc2english.blogspot.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ ) Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )
01-27-2018, 06:28 AM
(This post was last modified: 01-27-2018, 06:34 AM by deliveryninja.)
Okay when I put it together, I placed a small piece of cardboard under the switch and it's raised it enough that it seems to work no problem.
The bottom right screw is just there to see how close I can get the board to the shell, I have been putting that in from the outside of the shell when testing. Thanks for the help, I think it's all in place time for the final build!
01-27-2018, 06:34 AM
Oh, okay.
I'm glad you got it working. Sorry for jumping to the wrong conclusion there.
Card Fighters' Clash 2 English Translation ( http://cfc2english.blogspot.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ ) Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )
01-27-2018, 06:35 AM
No worries appreciate the quick replies, can't wait to get it up and running now
|
« Next Oldest | Next Newest »
|