Freeplay CM3 Slim with shoulder button upgrades
#31
Hipcat, can you try the new driver version : https://github.com/TheFlav/mk_arcade_joystick_rpi

You will have to add " auto_center_analog=1 " in mk_arcade_joystick.conf to check if it solve your problem.
Reply
#32
Just FYI, Porcinus, I think that Hipcat has it working now.  I had emailed him and helped him work out the analog params.  

For documentation purposes, he's using the Switch Joycon Analog Sticks, and the options line we worked out is...


Code:
options mk_arcade_joystick_rpi map=4 hkmode=2 i2cbus=1 x1addr=72 y1addr=79 x2addr=75 y2addr=77 x2dir=-1 x1params=1397,2797,16,192 y1params=1302,3102,16,192 x2params=896,2696,16,192 y2params=1057,2857,16,192 gpio=4,17,6,5,19,26,16,24,23,18,15,14,-20,42,43,41,40,35,36,37,-1
Card Fighters' Clash 2 English Translation ( http://cfc2english.blogspot.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ )
Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )
Reply
#33
(03-13-2019, 09:07 AM)Porcinus Wrote: Hipcat, can you try the new driver version : https://github.com/TheFlav/mk_arcade_joystick_rpi

You will have to add " auto_center_analog=1 " in mk_arcade_joystick.conf to check if it solve your problem.

Thanks a lot for all your info. I was pretty stuck on it, but Ed Flavor figured it all out and now everything is great. I really appreciate your help.
Reply
#34
No problems Wink

I will push the new version of the driver to Github this weekend if it did solve the analog troubles.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)