02-23-2018, 04:12 AM
(02-23-2018, 03:51 AM)Flavor Wrote: I can't say for sure, but the likely problem is that Kodi (or something else it's using) changes the HDMI resolution. The fbcp process (https://github.com/TheFlav/rpi-fbcp) that clones the HDMI output to the LCD can't handle on-the-fly HDMI resolution changes.
If you boot your Freeplay Zero/CM3 with HDMI attached and then run Kodi, do you see your TV changing resolution at the same time that the LCD stops updating?
EDIT: I didn't find a fix here, yet, but I was pointed to this thread on the topic. I'll add it here in case someone else wants to walk through it. https://www.raspberrypi.org/forums/viewt...&start=225
fbcp is installed by default on the CM3 image right?
"do you see your TV changing resolution at the same time that the LCD stops updating?" I am unable to test that right now since the mini HDMI cable can't quite reach the port. I need to cut more in the in the shell but I don't want to ruin it. I need a new mini HDMI cable with a longer end to test that again.