05-23-2016, 06:48 AM
This seems like very good news. I just can't understand why it is Unknown/0000.
So, I guess, make sure Zadig is closed, wait until Windows is done trying to find a driver for the cartridge. This can take a while. You can tell it to stop searching if you like.
Then, run Zadig. Yeah, that unknown device is likely the cartridge. I don't know why it shows 0000 0000.
WinUSB should work. If I recall correctly, the libusb-win32 and libusbK also work.
This is really very odd. The 0000 IDs shouldn't happen. If there is a hardware problem, then it just should not come up at all (no dah-ding sounds). If not, there are a some options that could be errors, but none are 0000.
(also, for fun, try switching the switch on the cart and booting it in your NGPC to see if there's another test ROM on there)
So, I guess, make sure Zadig is closed, wait until Windows is done trying to find a driver for the cartridge. This can take a while. You can tell it to stop searching if you like.
Then, run Zadig. Yeah, that unknown device is likely the cartridge. I don't know why it shows 0000 0000.
WinUSB should work. If I recall correctly, the libusb-win32 and libusbK also work.
This is really very odd. The 0000 IDs shouldn't happen. If there is a hardware problem, then it just should not come up at all (no dah-ding sounds). If not, there are a some options that could be errors, but none are 0000.
(also, for fun, try switching the switch on the cart and booting it in your NGPC to see if there's another test ROM on there)
Card Fighters' Clash 2 English Translation ( http://cfc2english.blogspot.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ )
Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )
Neo Geo Pocket Flash Cart and Linker Project ( http://www.flashmasta.com/ )
Avatar art thanks to Trev-Mun ( http://trevmun.deviantart.com/ )